|
Basic
check over and safety service |
|
Suitable
for bikes that have hardly been used from new, or have been left
in the garage since they were last serviced some years ago. Not
suitable for bikes that are used regularly. |
|
|
|
Our
basic check over and safety service includes the following number
of points. |
|
Brakes |
| Check that the blocks are not worn and the cables are not
rusted or frayed, replace if needed, check the brake levers are
secure and the brake blocks are aligned and that brakes function correctly. |
|
Gears |
| Check the cables are not worn, rusted or frayed, replace if
needed, check that all the gears work and index correctly, lubricate
front and rear mechs. |
|
Wheels
|
|
Check that the axle in the hub turns freely, adjust the
bearings if it doesn't. Check the tyres are not worn or cracked, replace if
needed, inflate to the correct pressure. |
|
Headset
|
|
Check headset for slackness, tighten if necessary. |
|
Bottom
bracket |
|
Remove cranks and check the bottom bracket axle for
tightness or slack, adjust bearings if necessary, refit cranks
and pedals. |
|
Lubrication-
: |
|
Lubricate the chain and sprockets |
| |
|
The cost of labour for a basic
check over and safety service which includes 17.5% VAT is
£37.50 |
|
This price does
not include any new parts that may need to be fitted, which will
be supplied at our current list price. |
| |
|
Thorough going over service. |
|
Suitable
for good quality bikes that are used regularly. |
|
Our
thorough going over service includes the following number of
points. |
|
Brakes
|
|
Check that the blocks are not worn and the cables are not
rusted or frayed, replace if needed, check the brake levers are
secure and the brake block are aligned and that brakes function correctly. |
|
Gears
|
|
Check the cables are not worn, rusted or frayed replace if
needed, check that all the gears work and index correctly, lubricate
front and rear mechs. |
|
Wheels
- : |
|
Check that the axle in the hub turns freely, grease the
bearings if needed and adjust. Check and replace broken spokes, true
wheels if need be. Check the tyres are not worn or cracked, replace if
needed, inflate to the correct
pressure. |
|
Headset
|
|
Check headset for slackness, tighten if necessary.
|
|
Bottom
bracket |
|
Remove cranks and check the bottom bracket axle for
tightness or slack, grease the bearings if need be and adjust
cups, or fit a new sealed unit if necessary, refit cranks and
pedals. |
|
Chain
and sprockets |
|
Check chain, sprockets and chainrings for wear,
replace if need be and lubricate. |
| |
|
The
cost of labour for a thorough going over service is
which includes 17.5% VAT is £59.50 |
|
This price does
not include any new parts that may need to be fitted, which will
be supplied at our current list price. |
| |
|
Complete
strip down and rebuild |
| Labour cost to
completely strip down a bike and rebuild with the old parts. |
|
Or rebuild onto another frame or the same frame after a
repainting, which includes 17.5% VAT
is £89.00 |
|
This price does not include any new
parts that may need to be fitted, which will be supplied at our current list price. |
| |
|
We do not service suspension forks or rear
suspension units. |
| |
| |
| |
| |
| |
|
Please note that Byercycles cycle shop
is now open just 4 days a week |
|
To place
an order with your credit card, telephone
our sales line
01462-811175, |
|
during shop hours. Wednesday - Thursday - Friday 9.00 am to
6.00 pm |
|
Saturday 9-00 am to 5-00 pm, the shop is closed on Sundays, Mondays
& Tuesdays. |
|
Or print
out our order form and post it. (Sorry but we are not an
online shop) |
|
Remember
it is easier to communicate with a person than it is with a mouse.
|
|
Thank you
for viewing our web pages.
|
|
This page
that was revised on 01 - 01 - 10 cancels all previous lists |
|
E - mail sales and enquiries |
| |
|
Page 34 |
